2013 toyota tacoma oil filter part number

About Toyota Tacoma Oil Filter

Toyota Tacoma oil filters are responsible to remove contaminants from engine oil, transmission oil, or lubricating oil. There are different types of oil filters. The cartridge type is a self-contained housing and element assembly that can be unscrewed and replace with a new one. Another type is the magnetic filters found in automatic transmissions. Toyota oil filters do not only filter out debris and unwanted engine deposits, it also helps to lower engine temperature of your Toyota Tacoma. Oil filters should be change every time an oil change is due. By doing so, it can extend the vehicle's life.

Please wait while the page loads...

2013 Toyota Tacoma Oil Filter

The engine oil in your 2013 Toyota Tacoma contains metal shavings, soot, sediment, particles, and substitute contaminants. The purpose of the oil filter is to remove those pollutants so your engine can run more smoothly and cut the likelihood of internal damage or substitute costly repairs.

Clean oil is essential to the performance of your 2013 Toyota Tacoma, and the best oil filter is divergent for every make and model and in some cases can be dependent on the type of oil you choose for your car. It's always best to check your 2013 Toyota Tacoma maintenance guide located in your owner's manual for the fitting type of oil filter and recommended replacement intervals. Don't have your owner's manual handy? Simply give Coggin Toyota at the Avenues a call at 9043376618 or schedule a service appointment online and one of our quick-lane oil techs can get your oil filter interchanged quickly and efficiently.

How long do 2013 Toyota Tacoma oil filters last?

The oil filter on your 2013 Toyota Tacoma will typically last over 3,000 miles or 3 months, however, many oil filters can survive average wear and tear for up to 7,500 miles. It's recommended that you get your 2013 Toyota Tacoma oil filter interchanged every time you get an oil change and have it inspected anytime you visit your local auto shop. At Coggin Toyota at the Avenues, we will check the oil filter for contaminants for free as part of our complimentary multi-point inspection. We also proposal a collection of oil filter & oil change coupons.

How much is a 2013 Toyota Tacoma oil filter?

A 2013 Toyota Tacoma oil filter generally fluctuates from $8.99 to $19.99 after rebates depending on a few customizable options. In most cases, the price of labor is more expensive than the filter itself. At Coggin Toyota at the Avenues, our oil and filter changes on the 2013 Toyota Tacoma are generally bundled together and can be done in under 30 minutes unless we're extremely busy. We use certified OEM components and tools to make sure every component of your vehicle is handled with care. We also offer a free multi-point inspection with every oil & filter change. Check out today's specials and schedule an appointment online.

2013 Toyota Tacoma Oil Filter Replacement

Most oil filters aren't helpful from the top, making them kind of a pain to replace. You'll need a lift or a tall jack to be able to do so. At Coggin Toyota at the Avenues, we've got multiple service bays with Toyota certified dedicated oil and lube technicians who can change your 2013 Toyota Tacoma oil filter rapidly at a particularly meager price. We'll also perform a free multipoint inspection anytime you visit. Check out our oil and filter coupons then book your appointment online to save even more! You can always give us a call at 9043376618 for more info on do-it-yourself oil filter replacement.

What brand oil filter does 2013 Toyota Tacoma use?

Coggin Toyota at the Avenues will always advocate you select informed factory parts when replacing your oil filter, chiefly on a 2013 Toyota Tacoma. These filters are hand chosen for your engine and may also require factory tools to access. Our dedicated oil filter technicians can have your oil and filter replacement completed in 30 minutes unless were incredibly busy. Give us a call or schedule your service online today!

What is the best 2013 Toyota Tacoma oil filter?

The best oil filter for a 2013 Toyota Tacoma is going to depend on the surface area, the material of the filter, and consistency in manufacturing. You don't want crumbled or bits of paper in your engine oil, and the greater the surface area, the more contaminants it can filter out. Of course, the fit is draconian, so our recommendation is to always go with the oil filter that Toyota chose exactly for your engine when it came off the assembly line. Coggin Toyota at the Avenues will replace the oil filter on your 2013 Toyota Tacoma with a brand new Toyota OEM certified replacement. Installation is made even easier when using our service center as we have mechanics that not only use certified OEM elements, but also the specialized tools fundamental to get to your oil filter.

Schedule your oil filter replacement with Coggin Toyota at the Avenues now!

What does a Toyota 90915 yzzd3 fit?

Fits Models: Land Cruiser. FJ Cruiser. Sequoia. Tundra.

What kind of oil does a 2013 Toyota Tacoma take?

5W-30 (All TEMPS) - 5W-30 is the best choice for good fuel economy and starting in cold weather. If 5W-30 is not available 10W-30 may be used. However, it must be replaced with 5W-30 at the next oil change.

Are all Toyota oil filters the same?

Remember, not all oil filters meet Toyota's stringent specifications. A non-Toyota filter element may not work as effectively and could even clog, causing costly engine damage. To protect your engine (and your pocketbook), always specify a Genuine Toyota oil filter.

How many quarts of oil does a 2013 Tacoma take?

Capacity: 5.5 quarts (with filter).