2022 4runner oil filter wrench

Member

Join Date: Sep 2020

Location: USA - '09 2WD

Posts: 84

Oil Filter Wrench Size

I've gone to a few auto parts stores as well as Walmart and Ace Hardware, but none has the correct size for the OEM oil filter wrench our trucks use. I'm not looking for the band, strap, or universal type wrench and I'm not willing to pay the dealer their outrageous price for that wrench. The type I'm searching for is the one pictured here. Mine is a V6, not sure if V8 uses the same. If you have any leads that would be awesome. Thanks.

Attached Images

Member

Join Date: Oct 2020

Location: Denver, CO

Posts: 104

The one I have used successfully on my V6 is labeled 73mm with 14 flutes and 3/8" drive. Its a Capri tool that also fits a 996 T 3.6, so I think its maintained the dimensions. Id check Amazon lol

Senior Member

Oil Filter Wrench Size

Quote:

Originally Posted by Urbanite

I've gone to a few auto parts stores as well as Walmart and Ace Hardware, but none has the correct size for the OEM oil filter wrench our trucks use. I'm not looking for the band, strap, or universal type wrench and I'm not willing to pay the dealer their outrageous price for that wrench. The type I'm searching for is the one pictured here. Mine is a V6, not sure if V8 uses the same. If you have any leads that would be awesome. Thanks.

I use this one, no issues!

uxcell A16041800ux1249 14 Flutes 73mm Inside Dia Cap Type Car Oil Filter Wrench Cup for Lexus Amazon.com: uxcell A16041800ux1249 14 Flutes 73mm Inside Dia Cap Type Car Oil Filter Wrench Cup for Lexus: Automotive

Edit: forgot to specify, this fits the YZZD3 Toyota filters perfect. Not an issue for me as I always use Toyota filters.

Sent from my iPhone using Tapatalk

Last edited by montijo505; 08-16-2021 at 12:25 PM.

Senior Member

Join Date: Jan 2012

Location: Somewhere, yet nowhere

Posts: 1,657

There is no specific / universal filter wrench for “your” vehicle. Every filter brand is unique in size. Bring your new or favorite filter to advance auto parts and choose the wrench that fits it. They come in various sizes. One will fit and the cost $5-&10. Dont over complicate it.

If you switch filter brands, your wrench may no longer fit. I’m partial to Purolator filters

*Handy tip #354, with a permanent marker, write the milage of when you installed the filter, on the filter itself. When you see 176,000 on the filter, and you are now at 182,000 miles, its time for an oil change.

__________________
2007 4Runner Sport 4WD 4.0L 225,000 miles
The real stats on gun murders in America compared to the world (link)
Good riddance to the Clinton Crime Family--> I Voted TRUMP�how�s it going for you now Trump is gone? Be careful what you ask for. You may just get it.

Last edited by Drcoffee; 08-16-2021 at 08:49 AM.

Member

Join Date: Sep 2018

Location: iowa

Posts: 904

the universal band type filter wrenches work great & avoid the hassle you are running into here where you cant find the right size specific for your filter.

& on these V6 engines, its so easy to get to the filter that if you or a previous person doesnt over tighten it, they can usually be removed by hand. then when installing a new filter dont gorilla tighten it down... i install & remove most my filters by hand, with a properly lubed gasket they only need about 1/2-3/4 turn to seal.

Member

Join Date: May 2004

Location: Wilmington, NC

Posts: 362

As others have said, filter cap wrenches aren't vehicle specific. It's specific to the filter used, although I would imagine (unconfirmed theory) manufacturers more-or-less tend to use the same diameter/flute arrangement for filters with the same vehicle application.

If you only need to use a wrench for removal, I'm a fan of the 3-claw universal ratcheting gizmos...about $8 from most vendors. Allows me to cover everything from my lawn mower filter to my dad's F-150 (that filter is at the upper end of the tool's diameter spec).

However, if you have a reason to need a tool for installation where you feel you can't get proper torque via hand tightening (ex. Purolator specs 3/4 to 1 turn after the gasket makes contact), the cap wrenches are the way to go, just be careful not to over tighten and distort the gasket. The universal claw tends to crush the filter a little, at least with Purolators. Harbor Freight has this kit of 6 caps in case you have multiple vehicle sizes to service or different branded filters for the 4Runner need a different cap. No personal experience...Good luck!

__________________
2003-2022: '03 Limited V8 4x4 - Galactic Gray Mica
2022-Present: '21 Nightshade 4x4 - Magnetic Gray Metallic

Senior Member

I've never used an oil filter wrench on my v6. They don't need to be tightened too the moon, gasket does a fine job with them on there hand tight. A little fresh oil on the gasket helps to prevent them from sticking when removing. I also write the mileage on the filter

Member

Join Date: Jan 2019

Location: Central NY

Posts: 673

Not adding anything- but agree with all. Certainly when you install them they just need to be snugged. That said I have had a few that get really wedged on there and ive had to resort to some more challenging ways to remove them.

I always use different filters depending on the deal I find, so it is frustrating that my socket/ wrench doesnt always fit

__________________
2008 SR5 4WD Black. Bilstein 5100, 5th gen coils/ rear springs. 255 80 17 AT for everyday use. Victory Sliders. Victory Front bumper with winch/ lightbar. headunit upgrade. Back up camera install. Expert at replacement rear hatches

All you need to go off road is to be willing to get some scrapes and dents along the way

Senior Member

Quote:

Originally Posted by Syr4RinNC

Not adding anything- but agree with all. Certainly when you install them they just need to be snugged. That said I have had a few that get really wedged on there and ive had to resort to some more challenging ways to remove them.

I always use different filters depending on the deal I find, so it is frustrating that my socket/ wrench doesnt always fit

Buy in bulk at the dealership and avoid that problem lol

Sent from my iPhone using Tapatalk

Senior Member

Join Date: Aug 2017

Location: Kansas City

Posts: 1,392

Real Name: Howard J. Turkstra

Quote:

Originally Posted by montijo505

Buy in bulk at the dealership and avoid that problem lol

Sent from my iPhone using Tapatalk

+1 to buying in bulk. I bought a case of 10 OEM filters and 10 drain plug gaskets a long time ago, and I still have a few left.

__________________

Senior Member

Quote:

Originally Posted by ads2539

+1 to buying in bulk. I bought a case of 10 OEM filters and 10 drain plug gaskets a long time ago, and I still have a few left.

Even if you buy a half case, that�s five filters. At 5k intervals depending on how much you drive that�s at least a couple years worth. I have a fumoto valve so no crush washers for me. Makes the whole thing even easier.

Sent from my iPhone using Tapatalk

Senior Member

Join Date: Aug 2017

Location: Kansas City

Posts: 1,392

Real Name: Howard J. Turkstra

Quote:

Originally Posted by montijo505

Even if you buy a half case, that�s five filters. At 5k intervals depending on how much you drive that�s at least a couple years worth. I have a fumoto valve so no crush washers for me. Makes the whole thing even easier.

Sent from my iPhone using Tapatalk

I just installed my fumoto valve, so I won�t need the 3 crush washers I have left ($1 ea).

__________________

Member

Join Date: Dec 2008

Location: Texas

Age: 72

Posts: 49

I bought an EXACT fit cap wrench, for my 2008 T4R V8 Sport, at Advance Auto Parts....12 years ago.
I had a Toyota factory filter in hand, when I was in the store.
The wrench is a virtual slip-fit over the factory filter end.

Hope this helps.

Kevin

Member

Join Date: Oct 2019

Posts: 66

Quote:

Originally Posted by riverwolf

If you only need to use a wrench for removal, I'm a fan of the 3-claw universal ratcheting gizmos...about $8 from most vendors. Allows me to cover everything from my lawn mower filter to my dad's F-150 (that filter is at the upper end of the tool's diameter spec).

Those are nice, except on some diesels, which can be torqued on there pretty good causes the jaws to dig into the filter and collapse it.

This style works similarly except it uses teeth to grip onto the filter. Hands down the best one I've used.

Attached Images

Senior Member

Join Date: Jan 2012

Location: Somewhere, yet nowhere

Posts: 1,657

Quote:

Originally Posted by ads2539

I just installed my fumoto valve, so I won’t need the 3 crush washers I have left ($1 ea).

Does the valve allow the thick oil to fully drain from the bottom of the oil pan? Looks to me like the valve threads would stand too tall in the pan stopping all the crud from draining completely. Id be curious, once you drain with the valve, remove the valve and see if anything more drains out.

Downside to buying in bulk, I have 5 $8 filters now for a Lexus car I no longer own. I buy 1-2 at a time now. Alway keep one in reserve. And reuse the crush washers forever.

__________________
2007 4Runner Sport 4WD 4.0L 225,000 miles
The real stats on gun murders in America compared to the world (link)
Good riddance to the Clinton Crime Family--> I Voted TRUMP�how�s it going for you now Trump is gone? Be careful what you ask for. You may just get it.

Last edited by Drcoffee; 08-18-2021 at 07:42 AM.