$4,745.00
- 100% CAD Designed and Manufactured in the USA
- 16″ of travel
- Utilizes a 2.5″x8″ coil-over shocks and 2.5″x8″ bypass shocks
- Boxed upper control arms, with 3/4″ heims for the frame pivots
- Custom stainless steel spacers for upper arms
- Fabricated spindle adaptors, utilizing a 1″ uniball for the upper arm pivot
- Boxed & internally braced lower control arms
- Fully fabricated shock mounts
- Aluminum tie rods with 3/4″ heim pivots & stainless steel clevis
- Powder coated finish
SKU: TTD9906Silverado4WD Category: Chevy
LSK Is Proud To Introduce The 1996-2006 GM 1500 4wd Race Kit. Our Race Kit Uses A Set Of Custom Upper & Lower Control Arms, Fully Fabricated Spindle, Extended Heimed Tie Rod w/ Machined Steering Clevis And Plate Shock Tower w/ Integrated UCA Mounts To Vastly Improve The On & Off Road Ride Quality. This Kit Is Best Suited For Those Who Use Their Vehicle As A Dedicated Off Road Rig Or One That Sees Occasional Street Use.
PERFORMANCE SPECS
- Wheel Travel - Averages 13.5" Of Useable Wheel Travel (Ranges 12" - 14.5" Depending On RCV Axle Assembly / Limit Strap / Bump Stop / Shock Configuration)
- Wheel Base: Extended 1.25" Forward
- Track Width: Extended 4.5" On Each Side
- Recommended Tire Size: 37"
- Recommended Wheel: 17 x 9" w/4.5" Backspacing (0mm Offset)
INCLUDES
- Upper Arms
- Lower Arms
- Spindles
- Machined Centerlink
- Tierods w/ Machined Steering Clevis
- Shock Towers w/ Integrated UCA Mounts
- Grade 8 Hardware
REQUIRES
- 8" 2.5" Coilovers (NOT INCLUDED IN KIT ABOVE)
- 8" 3.0" Bypasses (NOT INCLUDED IN KIT ABOVE)
- Welding Is Required - This Is Not A Bolt On System And Will Require Proficient Knowledge In Fabrication To Perform The Installation
- RCV Axle Assemblies - You Must Contact Our Sales Team To Discuss The Correct Axle Option For Your Application - Axle Assemblies Are NOT Included With This Kit (An Old Style Is Pictured With This Kit, We No Longer Offer That Axle Assembly)
- Extended Brake Lines (Minimum 33" Line End To End)
- Shock Hoop (Either LSK Pre-Bent Available Below Or Custom Tie In To Shock Tower)
- Possible Extension Of Factory ABS Sensor Line (Depends On Wire Routing)
- Bumpstops - Can Be Configured To Bump Off Of Lower Control Arm, Upper Control Arm Or Spindle Uniball Cup - Typically Recommend a King 2.0" x 2" Stroke With King Fabricated Cans
- Limit Straps - Recommend 10" Limit Strap With Adjustable Clevis Kit (Can be Purchased In The Builders Components Section of Our Store)
OPTIONAL UPGRADES
- Extended Brake Lines - Stainless Steel Braided Brake Lines With Black Covers Specifically Engineered For This Application
- Shock Hoops - Our Pre-bent Shock Hoops Orient Off Of The Tabs On Our Fabricated Shock Tower - Includes Frame Standoffs And Plastic Plugs
- Powdercoat Finish - Textured Black Or "LSK Grey" Finishes Available For All Coated Portions Of This Assembly (Shock Towers / Shock Hoops Ship Raw)
IMPORTANT NOTES
- WHILE WEBSTORE MAY DISPLAY AN IN STOCK STATUS, WEBSTORE DOES NOT TRACK KIT INVENTORY IN REAL TIME - PLEASE CONTACT OUR SALES TEAM FOR CURRENT LEAD TIME ON KIT COMPONENTS
- Coilovers And Bypasses Are Custom Ordered And Not Always Stocked Per Application. Please Email Our Sales Team For Current Lead Time On Shock Packages
- Powdercoat Finish - Textured Black Or "LSK Grey" Finishes Available For All Coated Portions Of This Assembly (Shock Towers / Shock Hoops Ship Raw) - Please List Color Choice In Comments Section Of Your Order, Raw Finish Is Available But May Have An Additional Lead Time
- Upper Control Arm: Use 7/8"-14 Rod Ends - Replacement Rod Ends Can Be
Purchased Through Our Online Store Under Builders Components
- Spindles: Use A 1.00" FK Uniball (PN: WSSX16T) And Replacements Can Be Purchased Through Our Online Store Under Builders Components
- Lower Control Arms: Use A 1.50" FK Uniball (PN: COMH24T) & LSK 1.75" Delrin Bushings. Replacements Can Be Purchased Through Our Online Store Under Builders Components
- Permanent Frame Modification - Shock Tower Is Installed In Place Of Factory Shock & Upper Control Arm Mounts
- If You Or Your Installer Have Any Questions Please Reach Out To Our Sales Team At (909)-305-4824 Or Email