Enter the characters you see below
Sorry, we just need to make sure you're not a robot. For best results, please make sure your browser is accepting cookies.
Type the characters you see in this image:
Try different image
Conditions of Use Privacy Policy
© 1996-2014, Amazon.com, Inc. or its affiliates
The Bissell PowerForce PowerBrush Pet 2910 is part of the Carpet cleaners test program at Consumer Reports. In our lab tests, Carpet cleaners models like the PowerForce PowerBrush Pet 2910 are rated on multiple criteria, such as those listed below.
Cleaning Shows how well each machine removed red clay stain from carpet.
Dryness Indicates how much solution was left behind. The best left a few ounces; the worst left over a pint in the area cleaned.
Convenience Included machine weight, cord length, coverage area, and tank access, filling and emptying.
- Home
- Appliances
- Vacuums, Steamers & Floor Care
- Carpet Cleaners
Item not available with current selections
How do you want your item?
Protect your purchase
Get the best value on product protection including fast repairs or replacements.
Add Walmart Protection Plan by Allstate
2-Year plan - $10.00
3-Year plan - $12.00
I don't need protection at this time
Rollback
Sponsored
current price Now $156.00
was $189.99
Bissell Proheat Pet Turbo Carpet Cleaner - 1799V
4 out of 5 Stars. 730 reviews
PickupDelivery3+ day shipping
Notice unusual marketplace activity?
Report6 BISSELL.com
WARNING To reduce the risk of fi re, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
1. Turn OFF and unplug your
machine. Follow steps 2 & 3 in
the section above to remove
the Dirty Water Tank.
2. Grab the top of the Nozzle
and pull it up and away from
the machine. Rinse or wipe
it clean. Use a cloth to wipe
debris from the red filter.
3. Use cloth to wipe clean.
4. Ensure the Dirty Water Tank
is empty by gently removing
the float stack and unscrewing
the ring at the bottom of the
tank. Follow steps 4 & 5 on
page 5.
5. Clean and rinse debris from
the float. Keeping the float
clean prevents your Dirty
Water Tank from overflowing
and ensures the seal stays
intact.
6. Once clean, assemble by
aligning the arrow on the float
with the notch on the tank.
Then, return the ring and twist
to lock. Make sure it’s fully
aligned, so water doesn’t leak.
7. To replace the Nozzle, align
top into channel in front of red
filter and press in place.
8. Use both hands to push the
bottom portion of Nozzle into
place.
9. Once Dirty Water Tank is
dry align the bottom of the
tank to the base and secure
into place with latches.
After-Cleaning Care
For more tips on maintaining your machine, visit support.BISSELL.com.
ATTENTION If you experience no suction, remove the Dirty Water Tank and ensure the Nozzle is secured and
latched appropriately. Return Dirty Water Tank to the machine and try cleaning again.