Estimate price near me
Included for free with this service
12-month / 12k-mile warranty
Free 50 point safety inspection
Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.
Oil Change Service
How much does a Oil Change cost?On average, the cost for a Lexus CT200h Oil Change is $107 with $36 for parts and $71 for labor. Prices may vary depending on your location.
2017 Lexus CT200hL4-1.8L Hybrid | Service typeOil Change | Estimate$158.10 | Shop/Dealer Price$183.57 - $243.09 |
2011 Lexus CT200hL4-1.8L Hybrid | Service typeOil Change | Estimate$142.38 | Shop/Dealer Price$173.32 - $236.54 |
2012 Lexus CT200hL4-1.8L Hybrid | Service typeOil Change | Estimate$142.38 | Shop/Dealer Price$173.32 - $236.53 |
2014 Lexus CT200hL4-1.8L Hybrid | Service typeOil Change | Estimate$142.38 | Shop/Dealer Price$173.29 - $236.48 |
2016 Lexus CT200hL4-1.8L Hybrid | Service typeOil Change | Estimate$142.38 | Shop/Dealer Price$173.34 - $236.57 |
2015 Lexus CT200hL4-1.8L Hybrid | Service typeOil Change | Estimate$142.38 | Shop/Dealer Price$173.32 - $236.53 |
2013 Lexus CT200hL4-1.8L Hybrid | Service typeOil Change | Estimate$146.13 | Shop/Dealer Price$176.89 - $239.97 |
Show example Lexus CT200h Oil Change prices
What is an oil change all about?
Engine oil is the lifeblood of the engine. The oil resides in the oil pan, which is under the car attached to the bottom of the engine. All internal (moving) parts of the engine need to be lubricated by the engine oil. Inadequate lubrication will cause the parts to wear out faster and eventually lead to engine failure. An oil filter keeps the oil clean and free of debris. If the filter is not replaced on a regular basis, it will get clogged and will not be able to pass oil into the engine.
Keep in mind:
- When the oil is changed you should always replace the oil filter.
- Replacement oil should always match the required specifications for your vehicle.
- After your oil has been changed, it’s a good idea to run the vehicle for a few minutes to make sure that there are no leaks.
How it's done:
- Remove and replace engine oil and filter.
- Check the condition of all fluids.
- Perform basic safety inspection.
- Start the vehicle and check for leaks in the system.
Our recommendation:
- It is best to follow the maintenance schedule provided by the manufacturer (you can check your schedule in your YourMechanic profile).
- We recommend replacing the oil and filter every 5,000 miles or four months.
- Synthetic oil (versus regular) is cost effective. It’s lubrication properties are better and you will not need oil changes as frequently.
- If you notice any fluids in your driveway, you should get your vehicle inspected immediately.
- Do not drive your car with low engine oil. It can severely damage the engine.
What are the common symptoms indicating you need an oil change?
- The amount of time since your last oil change exceeds the recommended miles.
- Maintenance light is on.
How important is this service?
Regular oil changes are generally considered the most important maintenance service for your car. To avoid severe engine damage, this simple and inexpensive service should be regularly scheduled.
Fast and easy service at your home or office
Backed by 12-month, 12.000-mile guarantee
Recent articles & questions
How to Attach a Car Battery-Mounted Power Cut-off Switch
Many Many people who store their vehicle (//www.yourmechanic.com/article/preparing-your-car-for-long-term-storage) for a length of time like to disconnect the battery from the electrical system of the vehicle. This prevents the vehicle from unintentionally draining the battery. With the battery disconnected, the risks...
How do I use the luggage net?
The luggage net can be used to hold items down in the trunk, so that they don’t move around. To use the luggage net, simply attach it to luggage net holders, which are located around the inside of the trunk....
ABS + Brake + Traction Control Yellow Warning light
It depends on the nature of the faults. If there is a internal processing error or solenoid valve block assembly fault. Then it is likely the module will need to replaced and then programmed. A used module could be used...
I have a 1987 chevy blazer S10, replaced brake light switch still no brake lights, whats wrong?
There is either a wiring break or perhaps excessive voltage drop on the circuit, that is a high enough resistance to prevent the required voltage from reaching the bulbs. Whatever the cause of the circuit failure, a Mechanic would simply...
- Home
- Estimates
- Lexus
- CT200h
- Oil Change