Mazda 3 coil spring replacement cost

Skip to main content

Amazon.com: JCS1512T TRW Coil Spring Set Mazda 3: 2004-2013 Rear : Automotive

Mazda 3 coil spring replacement cost

  • Automotive
  • Replacement Parts
  • Shocks, Struts & Suspension
  • Coil Springs

Mazda 3 coil spring replacement cost

|

Make sure this fits

We encountered an error while updating this page. Please refresh and try again.

  • VIDEOS
  • 360° VIEW
  • IMAGES


Currently unavailable.
We don't know when or if this item will be back in stock.

  • Make sure this fits by entering your model number.
  • Ensure optimal road hold in all driving situations and under varying load conditions
  • Low friction design restores steering and suspension systems back to their original operating performance
  • Sealed-For-Life Boots (Maintenance Free)
  • Every TRW part has four levels of testing/technical/audit review before approval is given with endurance testing at 500K cycles
  • Fits: Ford Focus: 2005 - 2011, Mazda 3: 2004 - 2013, Mazda 3 Sport: 2009 - 2013
  • Fit type: Vehicle Specific

See more product details

Note: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.


From the manufacturer

Mazda 3 coil spring replacement cost

Mazda 3 coil spring replacement cost

Coil Springs

TRW coil springs are designed to OE specification to provide a constant rate for original performance. Powder coated for maximum corrosion resistance and improved appearance. Our springs also go through magnetic particle inspection for controlled metallurgical processes. We provide consistent quality for long-life operation from our cycle and load testing of finished products.

Coil Spring Set

Mazda 3 coil spring replacement cost

Things to consider:

It is recommended that parts are replaced for left and right sides of the vehicle at the same time.

  • For confirmed fitment, please verify your vehicle with the 'Check Fit' option
  • Review the coordinating parts for a complete job

Technical Disclaimer:

During installation and assembly work all operating instructions, guidelines and tips from the vehicle manufacturer MUST be followed. And all work should be performed by a trained professional.

JCS1512T

TRW JCS1512T is a Coil Spring Set replacement part manufacutured to Original Equipment quality standards. Every TRW part has four levels of testing/technical/audit review before approval is given including endurance testing of 500K cycles.

This part fits:

Ford Focus: 2005 - 2011, Mazda 3: 2004 - 2013, Mazda 3 Sport: 2009 - 2013

Product Description

Low friction design restores steering and suspension systems back to their original operating performance. Glass fiber reinforced polymer bearing. Polyoximethylene (POM). Facilitates low friction, less heat, and longer wear. Sealed-For-Life Boots. (Fixed/Maintenance Free). Super high strength, hardness and rigidity to - 40 degrees. Every TRW part has four levels of testing/technical/audit review before approval is given. Endurance testing 500K cycles. Rotational & articulation torque, push pull.

Product information

Technical Details

Manufacturer ‎TRW
Brand ‎TRW
Model ‎TRW
Item Weight ‎11.79 pounds
Package Dimensions ‎16.81 x 12.48 x 6.26 inches
Item model number ‎JCS1512T
Manufacturer Part Number ‎JCS1512T
Position ‎Rear

Additional Information

Feedback

What's in the box

  • Coil Spring Set, Attaching Hardware, Instruction Sheet
  • Brands in this category on Amazon

    Customer reviews

    Top reviews from the United States

    There was a problem filtering reviews right now. Please try again later.

    Reviewed in the United States 🇺🇸 on September 8, 2021

    Good replacement. The car does set lower with the replacement springs. But that is common with all these type of aftermarket springs.

    Reviewed in the United States 🇺🇸 on December 10, 2021

    Quick delivery and direct fit

    Reviewed in the United States 🇺🇸 on August 8, 2021

    Didn't fit car like they said it would

    Reviewed in the United States 🇺🇸 on August 5, 2021

    Have had these for 5 months and are still very strong, no issues and fully recommend

    Is a broken coil spring an MOT failure?

    The coil spring should be rejected if it is cracked, fractured, or corroded such that the cross sectional area is reduced and the spring seriously weakened. If the spring mounting is cracked, fractured, loose, or seriously weakened by damage or corrosion, it should be rejected.

    How much does it cost to replace rear coil springs?

    The actual price will vary depending on your vehicle, location, type of spring replaced and whether you need additional services. Labor costs typically range between $133 and $168, while you may spend $217 to $254 for the parts.

    Can you drive car with damaged coil spring?

    Regardless of whether it's a broken coil spring or a broken shock absorber, you cannot drive a vehicle which has any element of the suspension that is broken. This is because a damaged or collapsed spring can cause sagging, which could cause more damage to your vehicle in the long-term.

    How do I know if my coil springs are worn out?

    Warning Signs of Worn Springs.
    Worn, smashed or missing jounce bumpers..
    Marks on the suspension stop where jounce bumper impacts..
    Excessive tire wear..
    Compromised handling or ride quality..
    Rust or corrosion on the springs..
    Inconsistent spring ramp angles or kinks..
    Excessive sagging, leaning or swaying (especially when loaded).