Sunbeam king size electric blanket dual control manual

Sunbeam King Electric Blanket BL5171 - Use Manual - Use Guide PDF.
Documents: Go to donwload!

Table of Contents Show

Why is the control on my Sunbeam electric blanket blinking?
How do I reset my Sunbeam electric blanket?
How long does it take for Sunbeam electric blanket to heat up?
What is the preheat button on heated blanket?

Owner's manual - (English)

Please read these instructions carefully and retain for future reference.

Sleep Perfect Machine Washable Electric Blankets

Instruction Booklet

Contents

Sunbeam’s Safety Precautions Safety Precautions for your Electric Blanket Sunbeam’s SleepPerfect Technology Features of your electric blanket Sleep Perfect Fitted Sleep Perfect Waterproof Sleep Perfect Antibacterial Sleep Perfect Quilted Sleep Perfect Pillow Top Sleep Perfect Fleecy Fitting your electric blanket Using your electric blanket Troubleshooting Care and cleaning

If you have any concerns regarding the performance and use of your appliance. please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.

Ensure the above safety precautions are understood.

Sunbeam is very safety conscious when designing and manufacturing consumer products. but it is essential that the product user also exercise care when using an electrical appliance.

Listed below are precautions which are essential for the safe use of an electrical appliance:

• Read carefully and save all the instructions provided with an appliance.

• Always turn the power off at the power outlet before you insert or remove a plug. Remove by grasping the plug - do not pull on the cord.

• Turn the power off and remove the plug when the appliance is not in use and before cleaning.

• Do not use your appliance with an extension cord unless this cord has been checked and tested by a qualified technician or service person.

• Always use your appliance from a power outlet of the voltage (A.C. only) marked on the appliance.

• This appliance is not intended for use by persons (including children) with reduced physical. sensory or mental capabilities. or lack of experience and knowledge. unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• The temperature of accessible surfaces may be high when the appliance is operating.

• Never leave an appliance unattended while in use.

• Do not use an appliance for any purpose other than its intended use. flame. electric element or on a heated oven.

• Do not place on top of any other appliance. over the edge of a table or bench top or touch any hot surface.

• Do not operate any electrical appliance with a damaged cord or after the appliance has been damaged in any manner. If damage is suspected. return the appliance to the nearest Sunbeam Appointed Service Centre for examination. repair or adjustment.

• For additional protection. Sunbeam recommend the use of a residual current device (RCD) with a tripping current not exceeding 30mA in the electrical circuit supplying power to your appliances.

• Do not immerse the appliance in water or any other liquid unless recommended.

• Appliances are not intended to be operated by means of an external timer or separate remote control system.

• This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops. offices and other working environments; farm houses; by clients in hotels. motels and other residential type environments; bed and breakfast type environments.

Sunbeam’s Safety Precautions

Safety Precautions for your Electric Blanket

If you have any concerns regarding the performance and use of your appliance. please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.

Ensure the above safety precautions are understood.

Important instructions – retain for future use.

Care Label Symbols

Attention

All Sunbeam Sleep Perfect electric blankets feature our exclusive SleepPerfect Technology. This technology uses a unique heating element that adjusts the power supplied to your electric blanket to maintain your selected setting.

A built-in microprocessor continually senses changes changes to your body temperature affecting the blankets' temperature and adjusts the power input accordingly. to provide a constant level of comfort.

On double. queen and king size electric blankets each side adjusts independently to maintain individual comfort levels. So you’ll always sleep soundly. even on the coldest nights.

This unique element also heats to your selected temperature in just 10 minutes. so there’s no need for hours of preheating before bedtime.

Sunbeam’s SleepPerfect Technology

Temperature sensitive. fast-heating elements

Nine levels of safety protection

Nine levels of safety protection make Sunbeam's Sleep Perfect range safer than any other electric blanket. A built-in microprocessor senses any rise in temperature and reduces the power supply to prevent overheating.

In the unlikely event of a fault. the microprocessor senses the abnormal operation and automatically cuts off power to the blanket.

A second microprocessor acts as a back up should the first fail.

For additional safety protection. all Sleep Perfect electric blankets contain a thermal back up fuse that is independent of the blanket control. It detects any abnormal temperature variations in the heating element and automatically switches the blanket off to prevent overheating.

Attention

Sleep Perfect Fitted

BL5121 Single Bed

BL5131 King Single Bed

BL5141 Double Bed

BL5151 Queen Bed

BL5171 King Bed

Your Sleep Perfect Fitted electric blanket has the following features:

SleepPerfect Technology Sunbeam’s exclusive SleepPerfect Technology continually senses and adjusts to changes in your room and body temperature to maintain your selected heat setting. So when the temperature drops outside. you’ll stay safe and warm.

Cosy feet heating The heating wires are concentrated at the base of the blanket to deliver extra heat around your feet. while keeping the rest of your body comfortably warm.

Fitted design cord keep the blanket flat and taut on the mattress. and make it easier to fit and remove from the bed.

For instructions on how to fit your Sleep Perfect Fitted electric blanket. see the section titled Fitted Electric Blankets on page 12.

Machine washable The detachable controls and waterproof element make your electric blanket safe to machine wash and may be tumble dried.

For instructions on how to launder your Sleep Perfect Fitted electric blanket. see the Care and Cleaning section on page 17.

9 heat timer control A choice of 9 heat settings allows you to select the desired temperature to keep you comfortable all night. The setting dial is illuminated to enable easy adjustment in the dark.

Ideal for preheating the bed. select the desired temperature and in 10 minutes your bed will be ready. You can also use the timer setting at either 75 minutes or 12 hours and the blanket will switch off at these intervals.

Detachable controls Always remove the controls when laundering your blanket. Store the controls during the summer months while your blanket remains on the bed as a comfortable underblanket.

If you choose to leave your blanket on the bed during the summer months. always detach the controls/cords and store until such time as you will again use it as an electric blanket.

Dual controls Your Double. Queen or King size electric blanket features two controls for individual comfort.

Sleep Perfect Waterproof

Your Sleep Perfect Waterproof electric blanket has the following features:

Waterproof inner layer Your Sleep Perfect Waterproof electric blanket contains a special waterproof membrane that prevents any liquids from reaching the heating wires or soaking through to the mattress.

Cosy feet heating The heating wires are concentrated at the base of the blanket to deliver extra heat around your feet. while keeping the rest of your body comfortably warm.

Fitted design The fitted skirt and quality extra strong elastic cord keep the blanket flat and taut on the mattress. and make it easier to fit and remove from the bed.

For instructions on how to fit your Sleep Perfect Waterproof electric blanket. see the section titled Fitted Electric Blankets on page 12.

Machine washable The detachable controls and waterproof element make your electric blanket safe to machine wash and may be tumble dried.

For instructions on how to launder your Sleep Perfect Fitted electric blanket. see the Care and Cleaning section on page 17.

9 heat timer control A choice of 9 heat settings allows you to select the desired temperature to keep you comfortable all night. The setting dial is illuminated to enable easy adjustment in the dark.

Detachable controls Always remove the controls when laundering your blanket. Store the controls during the summer months while your blanket remains on the bed as a comfortable underblanket.

If you choose to leave your blanket on the bed during the summer months. always detach the controls/cords and store until such time as you will again use it as an electric blanket.

Dual controls Your double/queen size blanket features two controls for individual comfort.

BL5221 Single Bed BL5231 King Single Bed BL5241 Double/Queen Bed

Sleep Perfect Antibacterial

BL5321 Single Bed BL5331 King Single Bed BL5341 Double Bed BL5351 Queen Bed BL5371 King Bed

Your Sleep Perfect Antibacterial electric blanket has the following features:

Antibacterial treatment Your Sleep Perfect blankets' polyester fibres feature Antibacterial treatment. Ideal for asthma and allergy sufferers. this treatment assists inhibit the growth of mould and bacteria. ensuring a fresher. more hygienic blanket.

Cosy feet heating The heating wires are concentrated at the base of the blanket to deliver extra heat around your feet. while keeping the rest of your body comfortably warm.

Fitted design The fitted skirt and extra strong elastic cord keep the blanket flat and taut on the mattress. and make it easier to fit and remove from the bed.

For instructions on how to fit your Sleep Perfect Antibacterial electric blanket. see the section titled Fitted Electric Blankets on page 12.

Machine washable The detachable controls and waterproof element make your electric blanket safe to machine wash and may be tumble dried.

For instructions on how to launder your Sleep Perfect Fitted electric blanket. see the Care and Cleaning section on page 17.

9 heat timer control A choice of 9 heat settings allows you to select the desired temperature to keep you comfortable all night. The setting dial is illuminated to enable easy adjustment in the dark.

Ideal for preheating the bed. the 75 minute setting automatically switches the blanket off after 75 minutes.

The 12 hour setting automatically switches the blanket off after 12 hours in case you forget.

Sleep Perfect Antibacterial continued

Detachable controls Always remove the controls when laundering your blanket. Store the controls during the summer months while your blanket remains on the bed as a comfortable underblanket.

If you choose to leave your blanket on the bed during the summer months. always detach the controls/cords and store until such time as you will again use it as an electric blanket.

Dual Controls Your Double. Queen or King size electric blanket features two controls for individual comfort.

Sleep Perfect Quilted

BL5421 Single Bed

BL5451 Queen Bed

BL5471 King Bed

BL5481 Super King Bed (New Zealand only)

Your Sleep Perfect Quilted electric blanket has the following features:

Quilted fabric The quilted electric blanket adds an extra layer of comfort to your bed. It is designed to remain on the bed all year round as a comfortable underblanket. with the added benefit of protecting your mattress. Simply detach the controls when not needed.

Cosy feet heating The heating wires are concentrated at the base of the blanket to deliver extra heat around your feet. while keeping the rest of your body comfortably warm.

Fitted design The fitted skirt and extra strong elastic cord keep the blanket flat and taut on the mattress. and make it easier to fit and remove from the bed.

For instructions on how to fit your Sleep Perfect Quilted electric blanket. see the section titled Fitted Electric Blankets on page 12.

Machine washable The detachable controls and waterproof element make your electric blanket safe to machine wash and may be tumble dried.

For instructions on how to launder your Sleep Perfect Fitted electric blanket. see the Care and Cleaning section on page 17.

6 heat and digital timer control A Sunbeam exclusive feature is express heat up; set to level 6 and you are ready for bed in 5 minutes! Select heat settings from 1 to 5 for all night use.

Choose from 2 timer settings and your blanket will automatically switch off after 1 or 9 hours.

Detachable controls Always remove the controls when laundering your blanket. Store the controls during the summer months while your blanket remains on the bed as a comfortable underblanket.

If you choose to leave your blanket on the bed during the summer months. always detach the controls/cords and store until such time as you will again use it as an electric blanket.

Dual controls Your Queen. King and Super King size electric blanket features two controls for individual comfort.

Sleep Perfect Pillow Top

BL5551 Queen Bed

Your Sleep Perfect Pillow Top electric blanket has the following features:

SleepPerfect Technology Sunbeam’s exclusive SleepPerfect Technology continually senses and adjusts to changes in your room and body temperature to maintain your selected heat setting.

So when the temperature drops outside. you’ll stay safe and warm.

Pillow top fabric 100% Cotton sateen stripe of pillowy comfort! This electric blanket adds an extra layer of comfort to your bed and is designed to remain on your bed all year round. simply remove the controls when not needed.

Cosy feet heating The heating wires are concentrated at the base of the blanket to deliver extra heat around your feet. while keeping the rest of your body comfortably warm.

Fitted design The fitted skirt and extra strong elastic cord keep the blanket flat and taut on the mattress. and make it easier to fit and remove from the bed.

For instructions on how to fit your Sleep Perfect Pillow Top electric blanket. see the section titled Fitted Electric Blankets on page 12.

Machine washable The detachable controls and waterproof element make your electric blanket safe to machine wash and may be tumble dried.

For instructions on how to launder your Sleep Perfect Fitted electric blanket. see the Care and Cleaning section on page 17.

6 heat and digital timer control A Sunbeam exclusive feature is express heat up; set to level 6 and you are ready for bed in 5 minutes! Select heat settings from 1 to 5 for all night use Choose from 2 timer settings and your blanket will automatically switch off after 1 or 9 hours.

Detachable controls Always remove the controls when laundering your blanket. Store the controls during the summer months while your blanket remains on the bed as a comfortable underblanket.

If you choose to leave your blanket on the bed during the summer months. always detach the controls/cords and store until such time as you will again use it as an electric blanket.

Dual controls Your Queen size electric blanket features two controls for individual comfort.

Sleep Perfect Wool Fleece

BL5621 Single Bed

BL5651 Queen Bed

BL5671 King Bed

BL5681 Super King Bed (New Zealand only)

Your Sleep Perfect Wool Fleece electric blanket has the following features:

SleepPerfect Technology Sunbeam's exclusive SleepPerfect Technology continually senses and adjusts to changes in your room and body temperature to maintain your selected heat setting.

So when the temperature drops outside. you'll stay safe and warm.

Australian Wool Fleece Featuring 500g/m2 28 micron Australian wool fleece top. your Sleep Perfect blanket is the ultimate in warmth and comfort all year round with the added benefit of heating!

The 25mm wool pile allows the air to circulate around your body in winter and summer. Simply detach the controls and store when not in use.

Cosy feet heating The heating wires are concentrated at the base of the blanket to deliver extra heat around your feet. while keeping the rest of your body comfortably warm.

Fitted design The fitted skirt and extra strong elastic cord keep the blanket flat and taut on the mattress. and make it easier to fit and remove from the bed.

For instructions on how to fit your Sleep Perfect Fleecy electric blanket. see page 12.

Machine washable The detachable controls and waterproof element make your electric blanket safe to machine wash and may be tumble dried.

For instructions on how to launder your Sleep Perfect Fitted electric blanket. see the Care and Cleaning section on page 17.

6 heat and digital timer control A Sunbeam exclusive feature is express heat minutes! Select heat settings from 1 to 5 for all night use.

Choose from 2 timer settings and your blanket will automatically switch off after 1 or 9 hours.

Detachable controls Always remove the controls when laundering your blanket. Store the controls during the summer months while your blanket remains on the bed as a comfortable underblanket.

If you choose to leave your blanket on the bed during the summer months. always detach the controls/cords and store until such time as you will again use it as an electric blanket.

Dual controls Your Queen. King or Super King size electric blanket features two controls for individual comfort.

Sleep Perfect Fleecy continued

Follow the instructions below for the type of electric blanket you have purchased.

A double/queen size electric blanket can safely be used on a double bed. providing the heating wires do not overhang the edge of the mattress. Do not tuck in.

Fitted electric blankets Place the electric blanket on your mattress with the control sockets on the underside of the blanket near the head of the bed (see Figure 3). Ensure the heating wires do not extend under the pillows.

Pull the elastic cord inside the fitted skirt over the top corners of the mattress. To fit the foot of the bed. pull from the centre of the blanket to the foot of the bed. and fit one corner at a time while holding the centre (see Figure 4).

Ensure the fitted skirt and elastic cord go completely under the mattress. Pull on the edges of the blanket to ensure that it is flat and square on the mattress.

Fitting your electric blanket

Figure 3.

Figure 4.

Figure 5.

Fitting your electric blanket (continued)

Connecting the controls To connect the controls. lift one corner of the blanket near the head of the bed to expose the connector socket. With the control set to the off position. pass the control cord through the triangular hole in the fitted skirt and insert the connector plug into the socket.

Ensure it is firmly clicked into position. controls into a 230-240V power outlet and turn the power on.

Note: Ensure that the controls are connected to the blanket before inserting the power cord into the power outlet. Connecting the power before attaching the controls to the blanket will replicate a power interruption and activate the safety system. preventing your blanket from heating.

Caution: The cord and controls must be kept outside the bed and away from external heating sources such as heaters and lamps.

Do not cover the control.

Before first use Before using your electric blanket for the first time. Sunbeam recommends that you switch the blanket to maximum heat (setting 9) for two to three hours to evaporate any moisture in the mattress. Repeat this process every few months to maintain a dry. healthy bed.

Your electric blanket control has nine heat settings. which are recommended for use as follows:

1-3 Low. gentle heat for all night use 4-6 Medium heat 7-9 High heat. for preheating only

Use the high heat settings to preheat your bed only. Do not sleep with your blanket on these settings for more than 30 minutes.

Using your 9 heat control with timer Your timer control features a slide switch to select the desired operating mode. plus an easy to use dial to select the temperature illuminated for easy adjustment in the dark.

75 minute setting Use the 75 minute setting to preheat your bed before hopping in. Move the slide switch to the 75min position. The temperature dial will then illuminate enabling you to turn the dial to your desired heat setting. The timer indicator light (positioned next to the slide switch) will go out. indicating that the blanket is on and heating.

Your electric blanket will automatically switch off after 75 minutes. The timer indicator light will illuminate and the light in the temperature dial will go out. indicating that the timer period has elapsed and the blanket is no longer heating.

To restart the timer. move the slide switch to the OFF position and then return it to the desired timer position.

Using your electric blanket

Figure 6.

12 hour setting Ideal for colder nights or those who like warmth all through the night. the 12 hour setting automatically switches your electric blanket off after 12 hours. Move the slide switch to the 12 hour position. The temperature dial will then illuminate enabling you to turn the dial to your desired heat next to the side switch) will go out. indicating that the blanket is on and heating. Sunbeam recommends that you use only settings 1. 2 or 3 for all night use.

Your electric blanket will automatically switch off after 12 hours. At the end of the timer period. the timer indicator light will illuminate and the light in the temperature dial will go out. indicating that the timer period has elapsed and the blanket is no longer heating.

To restart the timer. move the slide switch to the OFF position and then return it to the desired timer position.

Using your 6 heat digital timer control Ensure that the control is connected to the blanket properly. Move the slide switch on

The blue standby light ( ) will illuminate to indicate that the blanket is connected to the power outlet but is not heating.

Press the timer button ( ) to turn the control on. Heat setting 1 will illuminate.

Select the desired temperature using the temperature ( ) button. The selected temperature setting will illuminate. Pressing the temperature button cycles through the various temperature settings. from 1 through to 6. then back to 1.

Sunbeam recommends that you use only settings 1-5 for all night use. Use setting 6 for fast preheating only.

To change the timer period. press the timer button ( ). Pressing the timer button will cycle through the two timer options. 1 hour or 9 hours. and standby mode. If the timer setting is changed during the timer period. the timer will restart.

At the end of the selected timer period. the blanket will switch off and the blue standby light will illuminate. To switch the blanket on again. press the timer button to select a timer period. The control will default to the previous temperature setting. You can adjust the temperature at any time during the timer period.

Using your electric blanket (continued)

Figure 7.

Should your electric blanket fail to heat. check the following: 1. Check that the controls are properly connected to the blanket and clicked securely into position. If you find the control connector plug is not properly fitted to the blanket. switch the power off at the power outlet. securely attach the control connector plug to the blanket. and then switch the power back on. The timer indicator light should not flash once the power is reconnected. If the timer light flashes once the power is reconnected. the control connector plug is not properly fitted.

2. Check that the power cord is connected to the power outlet and the power is switched on.

3. Check that the control slide switch is in either the 75 minute or 12 hour position.

Troubleshooting - 6 heat digital timer control If the control detects a fault within the blanket. the standby light ( ) will flash.

If the standby light flashes twice. followed by a long pause. the control may not be connected to the blanket correctly. Turn the control off at the main power switch (located on the rear of the control). Check that the control is properly connected to the blanket and the connector is not damaged. Switch the control on again. If the standby light continues to flash. please contact Sunbeam Customer Service (see the back page for contact details).

If the standby light flashes three times. followed by a long pause. the blanket is to hot or may be damaged. Turn the control off at the main power switch (located on the rear of the control). Switch the control on again.

If the standby light continues to flash. please contact Sunbeam Customer Service (see the back page for contact details).

Troubleshooting

Care and cleaning

All Sleep Perfect electric blankets feature waterproof heating elements. making them fully immersible and safe to wash by hand or machine.

Before cleaning your electric blanket. ensure that the controls are unplugged from the blanket.

Spot cleaning Sponge the affected area using a neutral wool detergent or mild soap flakes mixed with lukewarm water. Sponge twice with clean water to remove detergent. Remove excess water by compressing the wet area between two towels.

Hand washing Wash the blanket in lukewarm water with a neutral wool detergent or mild soap flakes.

Soak for five minutes. then gently squeeze the soapy water through the fabric. Rinse thoroughly in clean. lukewarm water then drain excess water from the blanket. Do not wring.

Machine washing Take your electric blanket to a commercial laundry or wash in a domestic washing machine (size permitting). Wash on WOOL or DELICATES cycle with a neutral wool detergent or mild soap flakes. below 40°C.

Do not use high speed or extra spin cycles.

Line drying clothesline. Do not use pegs on the wired areas. Do not dry with a hairdryer or heater.

Ensure that the blanket and control sockets are completely dry before using again.

Machine drying Tumble dry your blanket on LOW setting for 15 minutes MAXIMUM. Smooth the blanket by gently pulling any creases out of the fabric. Line dry to ensure the blanket and control sockets are completely dry before use.

Do not dry with a hairdryer or heater.

Storing your blanket Your blanket can remain on the bed all year round as a comfortable underblanket. Simply remove the controls and store until winter.

If you wish to remove the blanket from your bed when not in use. roll or fold it loosely and store in a blanket bag or the bag it was the blanket.

Do not place heavy items on top of your electric blanket when storing.

When storing the electric blanket. allow it to cool down before folding.

Alternatively. you can send a written claim to

Sunbeam to:

Australia

Units 5 & 6. 13 Lord Street

Botany NSW 2019 Australia

New Zealand

26 Vestey Drive

Mt Wellington. Auckland New Zealand

Upon receipt of your claim. Sunbeam will seek to resolve your difficulties or. if the product is defective. advise you on how to obtain a replacement or refund.

To assist us in managing warranty claims. we recommend you register your product as soon as account on our website and send a copy of your original receipt to Sunbeam.

In order to make a claim under our warranty. you must have the original proof of purchase documentation for the product and present it when requested .

Should your product develop any defect within workmanship. we will replace or repair it. at our discretion. free of charge. A product presented for repair may be replaced by a refurbished product of the same type rather than being repaired.

Your warranty does not:

• cover freight or any other costs incurred in making a claim. consumable items. accessories that by their nature and limited lifespan require consequential loss or damage; or

• cover damage caused by:

• extend beyond 3 months if the product is used in commercial. industrial. educational or rental applications.

The benefits given to you by our warranty are in addition to other rights and remedies under law in relation to the product.

In Australia our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Our goods also come with guarantees that cannot be excluded under the New Zealand Consumer Guarantees Act.

If your warranty claim is not accepted. we will inform you and if requested to do so by you. repair the product provided you pay the usual charges for such repair. You will also be responsible for all freight and other costs.

Should your product require repair or service after the warranty period. contact your nearest Sunbeam service centres. visit our website or call our customer service line for advice on 1300 881 861 in Australia. or 0800 786 232 in New Zealand.

This Sunbeam product is covered by a 3 year replacement or repair warranty. which is in addition to your rights under the Australian Consumer Law (if your product was purchased in Australia) or New Zealand Consumer Guarantees Act (if your product was purchased in New Zealand).

3 Year Warranty

Need help with your appliance?

Contact our customer service team or visit our website for information and tips on getting the most from your appliance.

In Australia

Visit www.sunbeam.com.au Or call 1300 881 861

In New Zealand

Visit www.sunbeam.co.nz Or call 0800 786 232

SleepPerfect’ is a registered trademarkof Sunbeam Corporation

Made in China.

Due to minor changes in design or otherwise. the product may differ from the one shown in this leaflet.

ABN 45 000 006 771 Units 5 & 6. 13 Lord Street Botany NSW 2019 Australia Unit 3. Building D 26 Vestey Drive Mt Wellington Auckland New Zealand Sunbeam Corporation is a division of GUD Holdings Ltd.

7/13

Newest Added: EK4000 FS7600 CP4600 KE9150 KE2210CP

Tags: Sunbeam Health & Household Use Manual, Sunbeam Slow Cooker Manual, Sunbeam Slow Cooker HP5520, Sunbeam Cp4600, Sunbeam 4600

Why is the control on my Sunbeam electric blanket blinking?

What does it mean when the Sunbeam electric blanket control blinks? If these signs are flashing on your digital control or if there is blinking light on your gradient control, that means there is a problem with your blanket and it needs to be reset.

How do I reset my Sunbeam electric blanket?

Check that the control is tightly connected to the module in the blanket. Re-plug the power cord into the wall outlet. On a digital control, you should see flashing symbols and the display on your control will clear. Your blanket is now reset.

How long does it take for Sunbeam electric blanket to heat up?

Plug the main power cord into a 110-volt or 120-volt wall outlet. Press the "On/ Off" or "On" button to turn on your warming product. Set your warming product to the highest setting and wait 5 to 7 minutes. Put your hand between the folds and feel the warm, soothing heat.

What is the preheat button on heated blanket?

Preheat Feature (selected models only): The preheat function will heat the bed for a period of 30 minutes and the control will return to its original setting. 1 To use the preheat feature, simply turn on the warming product by pressing the “On/Off” button and then press the “Preheat” button.