One day it might happen that instead of starting smoothly like it usually does, your automatic car might just hesitate,... Car Bibles Staff | Published Apr 24, 2018 6:27 AM One day it might happen that instead of starting smoothly like it usually does, your automatic car might just hesitate, especially while shifting gears. The first thought that could come to your mind would pertain to something being wrong with the transmission system of your car. However, before stepping on the panic button and calling the mechanic, what you could do is check the level of transmission fluid. Unless your vehicle relies on electricity for running, it is likely to use some variant of transmission fluid, which needs to be replaced once in a blue moon. Automatic transmission has been known to operate smoothly for thousands of miles, which is why it is usually taken for granted by car owners. However, given its limited lifespan, it runs out one day and the resultant friction in the system hinders with the smooth functioning of the car. The process of adding fluid to your automatic transmission car is comprised of two stages, which are outlined as follows. Stage 1 – Checking the Level of Fluid in the CarBefore adding fluid, it is imperative to check the existing level of fluid in the car and to do so you need gloves and a towel/rag. Then follow these steps:
At this stage you must make it a point to check the color and condition of the fluid. It should ideally be clear and pink, but sometimes it does turn out to be burnt, milky or smelly. These are signs of contamination and repairs and should be referred to a professional mechanic. Likewise, there might be air bubbles also, which implies the presence of too much fluid or the wrong variant being used. Step 2 – Adding Fluid in the Automatic Transmission CarTo add fluid in the automatic transmission car, you must equip yourself with a funnel and a can of fluid. Next, following are the steps that you need to follow:
Related Post: The Effects and Signs of Too Much Transmission Fluid Final ThoughtsHesitation of the vehicle while starting is a symptom that could either mean a faulty transmission or low level of fluid in the system. Therefore, it is advisable to first check the level of fluid in the automatic transmission car rather than assume that the system might have broken down and incur the cost of replacement. Related Post: Transmission Fluid Change Cost Sources:
MORE TO READ
Can you put transmission fluid in while the car is running?Yes, many experts say the best policy is to add transmission fluid when a car is idling because you don't want to run the risk of overfilling.
Are you supposed to check transmission fluid while the car is running?Transmission fluid expands in heat and in order to receive accurate results, it must be under normal operating conditions. If the fluid is checked when the engine is cold, you may get false results indicating the fluid is low. Allow the engine to continue running while you check the level.
Can you put transmission fluid in while engine is hot?Insert long funnel into automatic transmission fluid dipstick hole. Carefully add automatic transmission fluid in small increments and recheck level each time until fluid level reaches "warm" line. CAUTION: DO NOT OVERFILL OR SPILL AUTOMATIC TRANSMISSION FLUID ON HOT ENGINE PARTS!
When should I add transmission fluid to my car?There are two lines or marks on the dipstick labeled either; “Hot” and “Cold” or “Full” and “Add.” The fluid needs to at least be between these two lines. If it is below the bottom line, then more fluid needs to be added.
|