How do you turn on apple watch series 6

If you notice that your Apple Watch Series 6 hangs, stays frozen or "thinking" for a long time, it does not react, perhaps because it is overloaded and you have thought about restarting quickly to free up its 1 GB RAM memory, in just three steps we will indicate you how to restart it.

A restart does not erase any data, it only consists of turning the device off and on again, if you want to erase all the content and restore the factory, consult the following tutorial: How to restore a Apple Watch Series 6.

Before restarting, you must bear in mind that you must know the PIN code of the SIM card and the unlock pattern or password of the Watch Series 6, since it will request it when it is turned on again.

Before restarting your Watch Series 6 make sure it has enough battery and if it is charging remove it from the charging base, it is not possible to restart it while it is charging.

If your Apple Watch doesn't turn on, it might be dead or facing issues charging. You could also be stuck on a setting such as Battery reserve or Theater mode, both of which create the appearance of a black screen. Finally, you may need to force the device to restart.


JUMP TO KEY SECTIONS

Why won’t my Apple Watch turn on?

How do you turn on apple watch series 6

Kaitlyn Cimino / Android Authority

Before you give up, there are a few fixable reasons your Apple Watch may not be turning on. If none of the problems below apply to you, it could be time to take your device in for a checkup at an Apple store.

The device is out of battery

The most obvious reason for your Apple Watch not turning on is that the battery is dead. Luckily, this is the easiest solution to fix. On the Series 7, charging from 0—80% takes only 45 minutes.

Your charger isn’t working properly

If you left your watch to charge up and came back to a device that still won’t turn on, your charger may be the culprit. Faulty third-party chargers or even a worn-out one from Apple are worth replacing. There is also the possibility that the outlet you are plugging into isn’t supplying power.

Your Apple Watch is frozen

Apple Watches can sometimes freeze or get stuck on a black screen. Often, this is the result of an outdated version of watchOS or a glitchy app.

Your Apple Watch is in Power Reserve or Theater Mode

There is also a chance your watch is actually on but using a setting that limits your use. In Power Reserve, you can’t access watch features beyond the time, and your watch and iPhone can’t communicate. Unless you press the side button, your device will appear to be off. Similarly, Theater Mode turns off audio alerts and disables the device’s ‘raise to wake screen’ gesture.


How to get your Apple Watch to turn on again

How do you turn on apple watch series 6

Kaitlyn Cimino / Android Authority

If (fingers crossed) you’re facing a minor issue, one of the solutions below will likely help you get your Apple Watch turned back on. If your watch is completely shot, it may just be time to replace it.

Charge your battery

If your device’s battery is dead, you need to charge it. Insert your charging cable into a USB port, or USB power adapter plugged into a power outlet. Then place the back of your Apple Watch against the concave side of the charger. You will feel magnets align your device in place.

Assess your charger and outlet

You will know your device is charging when a lightning bolt appears on the screen. If this does not occur after a few moments, you may have an issue with your power supply. Check your outlet with an alternative device. Confirm that your charging block and cable are plugged in and your watch is aligned correctly. If the outlet is working and both the charging pack and device are clear of debris, you may need to replace your charging cable.

Reboot your device

If your device doesn’t charge, force a restart by simultaneously pressing and holding the Digital Crown and side button. Do this for at least 10 seconds or until you see the Apple logo. Your device may have frozen and could require juice once it powers up.

Additionally, make sure you are running the latest version of watchOS available. Regular software updates ensure battery use efficiency and make sure you are free of bugs.

Disable Power Reserve and Theater Mode

How do you turn on apple watch series 6

Mark O'Neill / Android Authority

To disable Power Reserve, press and hold the side button until the Apple logo appears, then wait for your device to restart. You will likely also need to charge the device. To disable Theater Mode, tap your display, swipe up to open the Control Center, and tap the Theater Mode icon (two masks).


Read more: The best Apple Watch chargers you can buy

Can I charge my Apple Watch overnight?

Yes. According to Apple, it is not damaging to charge the Apple Watch overnight.

Can my Apple Watch charger charge my iPhone?

No, your first-party watch charger cannot charge your iPhone, even though iPhones now support Qi wireless charging.

Why is my Apple Watch dying so fast?

The latest model should last around 18 hours between charges, but several factors can impact that estimate. Read our dedicated guide to maximize your battery life by adjusting your settings.

Why is my Series 6 Apple Watch not turning on?

While it may sound silly at first, one of the biggest reasons why your new Apple Watch won't turn on is maybe because your Apple Watch's battery has run too low or drained out. Put your smartwatch on a charger and let it charge for some time. Once the smartwatch has got enough juice, it will boot up automatically.

Why is my Apple Watch not turning on?

Check the battery, and check your Apple Watch charger One common reason an Apple Watch won't turn on is simply that the battery is dead. Connect the Watch to its charger, and if that doesn't work, make sure you try a different charging cable and charger to see if your charger is faulty.

How do you start a watch series 6?

To turn on your Apple Watch, press and hold the side button until you see the Apple logo. Bring your iPhone near your Apple Watch, wait for the Apple Watch pairing screen to appear on your iPhone, then tap Continue. Or open the Apple Watch app on your iPhone, then tap Pair New Watch.

Where is the power button on Apple Watch?

If your Apple Watch is charging, take it off the charger. Press and hold the side button until you see the power button in the upper-right corner of the display.