-
On the right inner side of the fridge, you will find the model number.
-
Identifying the correct model number will ensure the proper purchase of the new water filter.
-
Click options on the control panel on the front of the left door.
-
Here it will say ice maker is on, click the minus button to turn it off.
-
You will hear a beeping sound to ensure that the ice maker is turned off.
-
The water filter is in the upper right corner of the fridge.
-
To remove the water filter turn it to the right until you feel it detach.
-
Then pull the filter straight out slowly from its slot.
-
Water may drip from the filter upon removal. Putting a towel underneath and removing products from that area will ensure an easy clean-up.
-
Once the filter is removed, identify the model number on it.
-
The model number will ensure you buy the correct replacement at the store.
-
Upon getting the new filter from the store install it into the fridge.
-
Insert the filter straight into its designated slot.
-
Twist the filter to the right until you feel and hear it click into place.
-
To turn the icemaker back on click the options button and hit the minus button, it will beep indicating it is back on.
-
To reset the water filter you hit the down arrow button beneath the options button and go down to "water filter".
-
Press and hold the set button above the minus button on the right side, it will then say "good" next to the water filter.
-
Press options again to return to the main screen.